Christie Boxer 4K Technical Reference page 19

Command Description
CCA+BOFW <blue of
white saturation
value>
CCA+RDPX <x Sets the native color primaries for the projector using
coordinate for red> the x,y coordinate form, scaled by a factor of 10,000.
For example, an x value of 3350 corresponds to
CCA+RDPY <y
x=0.3350 in the CIE 1931 chromaticity scale.
coordinate for red>
This command is only available if the video electronics
CCA+GNPX <x
are on and Max Drives is selected. It is only available to
coordinate for
a service user.
green>
CCA+GNPY <y
coordinate for
green>
CCA+BLPX <x
coordinate for blue>
CCA+BLPY <y
coordinate for blue>
CCA+WHPX <x
coordinate for
white>
CCA+WHPY <y
coordinate for
white>
CCA+COPY <value> Copies the values from one of the other pre-defined
color tables into the custom color table. This command
is only available if video electronics are on.
CCA+SAVE Saves the current primary settings (for example, CCA
+RDPX, and so on) as the new default color primary
settings.
Save these settings after calibrating the color primaries
(such as measuring the primary x,y coordinates using a
spectroradiometer or similar equipment).
This command is only available if video electronics are
on. It is only available to a service user.
CCA+RSET Resets the native color primary settings to their
defaults.
If primary settings have not been saved (CCA+SAVE),
this resets the primary settings to hard-coded defaults.
This command is only available if video electronics are
on. It is only available to a service user.
Examples
Use a custom color table:
(CCA+SLCT 3)
Boxer 4K Serial API Commands Technical Reference
020-101697-05 Rev. 1 (07-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
The valid range for each value
depends on which of the Red,
Green, Blue, or White point is
being adjusted.
0 = Max Drives
1 = Color Temperature
2 = HD Video (ITU-RBT.709)
—
—
19