Page 1
Installation and Setup Guide 020-103014-03 Mirage 4K40-RGB...
Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
Page 4
Running Auto Setup to optimize display settings......36 Configuring Mirage 4K40-RGB to work with Christie Link......36 Connecting devices and establishing communication.
This projector is intended for use in a non-cinema environment. This projector must be operated in an environment that meets the operating range specification. Use only the attachments and/or accessories recommended by Christie. Use of others may result in the risk of fire, shock, or personal injury.
• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components. • Only Christie qualified technicians are authorized to use the tools provided in the toolbox. AC power precautions Read all safety and warning guidelines before connecting to AC power.
Possible hazardous optical radiation emitted from this product. (Risk group 3) • Only Christie qualified technicians who are knowledgeable about the hazards associated with laser use, high-voltage, and high temperatures generated by the product are authorized to assemble, install, and service the Christie Laser Projection System.
Page 9
• F—Represents the side view of the projector. The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to its most hazardous position. For US and international hazard distances based upon IEC 62471-5:2015, Photobiological Safety of Lamps and Lamp Systems –...
Page 10
• Temporary show installations containing Risk Group 3 laser-illuminated projectors may be installed by Christie or sold or leased only to valid laser light show variance holders (laser light show manufacturers) for image projection applications. Such manufacturers may currently hold a valid variance for production of Class IIIb and IV laser light shows and/or for incorporation of the Risk Group 3 laser-illuminated projectors into their shows.
Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
® Mirage 4K40-RGB is a professional quality, easy-to-use 3DLP RGB laser projector. The high-brightness Mirage 4K40-RGB is designed to meet the special demands found in large venues, live events, and ™ high-usage environments. With reliable Christie RealLaser illumination integrated in a rugged chassis ™...
Introduction Contact your dealer Record the information about your projector and keep this information with your records to assist with the servicing of your projector. If you encounter a problem with your Christie projector, contact your dealer. Purchase record Dealer:...
• Fiber connector safety cover Product documentation For installation, setup, and user information, see the product documentation available on the Christie website. Read all instructions before using or servicing this product. Mirage 4K40-RGB 1. Access the documentation from the Christie website: •...
Installation and setup Learn how to install, connect, and optimize the projector display. Site requirements To safely install and operate the Mirage 4K40-RGB projectors, the installation location must meet these minimum requirements. Physical operating environment • Ambient temperature (operating) 5°C to 40°C (41°F to 104°F) •...
Installing the projector lens Only use lenses designed for Mirage 4K40-RGB projectors. Installing a lens not designed for Mirage 4K40-RGB, results in a warning that the lens is not present. 1. Remove the lens caps from the lens.
Page 35
5. Use the Convergence test pattern to assist with adjusting the horizontal and vertical lines. Horizontal adjustments are controlled by adjusting knob 3. Vertical convergence and rotation are controlled by adjusting knobs 1 and 2. Christie recommends rotating a single knob a maximum of a quarter rotation before adjusting the second knob a quarter rotation.
The system optimizes the active signal and displays a progress message on screen. Configuring Mirage 4K40-RGB to work with Christie Link Configure Mirage 4K40-RGB to work with Christie Link, which provides a fully integrated fiber solution for long range video transport. 1. Turn on Mirage 4K40-RGB.
Page 37
From the side panel home page, select Input. b) On the Input selection page, select the appropriate input marked Christie Link. More than one input source may be listed as Christie Link, depending on how many signals are being sent from Christie Link.
One 3GIC card This card may or may not be included with your model. Standard inputs are subject to change. Refer to the Mirage 4K40-RGB Specifications Guide (P/N: 020-103016-XX) for more details. Mirage 4K40-RGB Installation and Setup Guide 020-103014-03 Rev. 1 (08-2019) Copyright 2019 Christie Digital Systems USA, Inc.
Two DDIC cards This card may or may not be included with your model. Standard inputs are subject to change. Refer to the Mirage 4K40-RGB Specifications Guide (P/N: 020-103016-XX) for more details. Related information DDIC video formats for Mirage projectors (on page 53)
One TDPIC card This card may or may not be included with your model. Standard inputs are subject to change. Refer to the Mirage 4K40-RGB Specifications Guide (P/N: 020-103016-XX) for more details. Related information TDPIC video formats for Mirage projectors (on page 52)
One THIC card This card may or may not be included with your model. Standard inputs are subject to change. Refer to the Mirage 4K40-RGB Specifications Guide (P/N: 020-103016-XX) for more details. Related information THIC video formats for Mirage projectors (on page 54)
HBMIC video formats for Mirage projectors (on page 50) Dual-input 3D for Mirage projectors (on page 55) Connecting a video source using TSIC The Terra SDVoE (TSIC) input card accepts digital video data from a Christie Terra Transmitter. Part number: 144-132107-XX The input configuration listed below is supported.
Ethernet is setup to obtain an IP address automatically if a DHCP server is on the network, modify IP settings, or manually enter an address. Christie recommends using the Ethernet port on the IMXB as the HDBaseT port is limited to 100 Mb/s. You cannot change the IP settings using the web interface.
The list of formats listed below are not exhaustive and other formats may be supported. For more information, contact Christie Technical Support. For a list of supported Christie Link video formats, see the Christie Link User Manual (P/N: 020-102234-XX). HBMIC video formats for Mirage projectors Identify the video formats for the HBMIC card.
Page 61
Corporate offi ces Worldwide offi ces Christie Digital Systems USA, Inc. Africa United Kingdom Columbia Korea (Seoul) ph: 714 236 8610 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000 ph: +57 (318) 447 3179 ph: +82 2 702 1601 Christie Digital Systems Canada Inc.