Loe-Video Loop Out Enable - Christie Boxer 4K Technical Reference

Command
LMV+HRUN <-1 | 0 | 1>
LMV+VRUN <-1 | 0 | 1>
LMV+FRUN <-1 | 0 | 1>
LMV+ZRUN <-1 | 0 | 1>
Examples
Set the lens to H:1000, V:1500, Z:500, F:500:
(LMV 1000 1500 500 500)
Start to move horizontal motor toward positive max position:
(LMV+HRUN 1)
Stop the vertical motor:
(LMV+VRUN 0)
Start moving the zoom motor towards the negative max position:
(LMV+ZRUN -1)
Move the horizontal motor 45 steps in the positive direction:
(LMV+HSTP 45)
LOE–Video Loop Out Enable
Enables or disables video loop out on the THIC, 3GIC, and TDPIC cards.
Commands
Command Description
LOE <0 | 1> Enables or disables video loop out. This
command is only available if video
electronics are on and it only applies to
Boxer 4K Serial API Commands Technical Reference
020-101697-05 Rev. 1 (07-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Description
Starts and stops the horizontal
motor.
Starts and stops the vertical
motor.
Starts and stops the focus
motor.
Starts and stops the zoom
motor.
Serial API commands
Values
The maximum absolute value is dictated by
the current location of the motor and the
range of the axis (see the LMV command
above).
-1 = Moves the display left
0 = Stops the motor
1 = Moves the display right
-1 = Moves the display down
0 = Stops the motor
1 = Moves the display up
-1 = Moves the display inward
0 = Stops the motor
1 = Moves the display outward
-1 = Makes the display larger
0 = Stops the motor
1 = Makes the display smaller
Values
0 = Disables video loop out
1 = Enables video loop out (Default)
35