Asynchronous
messages
The projector can generate some asynchronous messages.
The following lists examples of each message, including why and when they are generated. Bolded
and underlined text indicates a fixed part of the message.
Type
Message
Card
(65535 00000 FYI01901 "Card x
Detected
detected")
Card
(65535 00000 FYI01901 "Card x
Removed
removed")
Date/Time
(65535 00000 FYI00916 "Setting Date to
2015/05/20")
(65535 00000 FYI00916 "Setting Time to
00:00:00")
Factory
(65535 00000 FYI00919 "All settings have
defaults
been restored to their factory defaults. Reboot
is required to take effect.")
Networking
(65535 00000 FYI00915 "Configured
network: IP:192.168.228.6 Mask:
255.255.252.0 Gateway:192.168.228.1")
Status
(65535 00000 FYI00000 "(SST+LAMP?001)
Lamp Hours = 00:00 (h:m)")
(65535 00000 ERR00000 "System Warning:
(SST+LAMP?001) Lamp Hours = N/A")
(65535 00000 ERR00000 "System Error:
(SST+VERS?003) Image Processor HW Version
= Detection Fault")
Boxer 4K Serial API Commands Technical Reference
020-101697-05 Rev. 1 (07-2017)
Copyright
2017 Christie Digital Systems USA Inc. All rights reserved.
©
Description
Triggered when a new card is detected in slot X
while the video electronics are already on.
Triggered when a card is removed from slot X
while the video electronics are on.
Generated when the date or time are changed,
respectively.
Generated when a factory default has been
performed on the projector.
Generated when the network settings have
changed. Network settings can change due to a
number of specific events such as:
• Operator changes the network settings
(through any of the standard interfaces).
• DHCP lease is renewed.
• Network cable was unplugged or plugged in.
Generated when a status item changes from:
• An error or warning state to an OK state.
• An OK or error state to a warning state.
• An OK or warning state to an error state.
50