Christie Boxer 4K Technical Reference page 18

Command Description
CCA+GNCY <y
coordinate for
green>
CCA+BLCX <x
coordinate for blue>
CCA+BLCY <y
coordinate for blue>
CCA+WHCX <x
coordinate for
white>
CCA+WHCY <y
coordinate for
white>
CCA+GOFR <green Defines a custom color table using saturation values.
of red saturation
Each control represents a percentage of each native
value>
RGB component needed to produce a target RGB space.
CCA+BOFR <blue of
This command is only available if the video electronics
red saturation
are on and Custom is selected. (Saved value)
value>
CCA+ROFG <red of
green saturation
value>
CCA+BOFG <blue of
green saturation
value>
CCA+ROFB <red of
blue saturation
value>
CCA+GOFB <green
of blue saturation
value>
CCA+ROFR <red of Defines a custom color table using saturation values.
red saturation
Each control represents a percentage of each native
value>
RGB component needed to produce a target RGB space.
CCA+GOFG <green
of green saturation
value>
CCA+BOFB <blue of
blue saturation
This command is only available if the video electronics
value>
are on and Custom is selected. (Saved value)
CCA+ROFW <red of Defines a custom color table using saturation values.
white saturation Each control represents a percentage of each native
value> RGB component needed to produce a target RGB space.
CCA+GOFW <green This command is only available if the video electronics
of white saturation are on and Custom is selected. (Saved value)
value>
Boxer 4K Serial API Commands Technical Reference
020-101697-05 Rev. 1 (07-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
• Red of red is equivalent to red of white.
• Green of green is equivalent to green of white.
• Blue of blue is equivalent to blue of white.
Serial API commands
Values
-1000 to 1000, where 1000 =
100%
A negative value reduces the
influence of the component by
scaling up the other two
components.
0 to 1000, where 1000 = 100%
0 to 1000, where 1000 = 100%
18