General Remarks And Hints When Using External Usb-Devices; External Usb-Devices - Connection; External Usb-Devices - Disconnection - GE Voluson P6 Service Manual

GE H DRAFT
EALTHCARE
DIRECTION 5459672-100, R
3-5-9

General Remarks and Hints when using external USB-Devices

Do not connect or disconnect any external USB-devices to or from the system while
WARNING WARNING
scanning a patient! The appearing dialogs could distract you from the scan!
!! WARNING:
3-5-9-1

External USB-Devices - Connection

When an external USB-storage device (such as a USB-memory stick or an external hard disk) is
connected to the Voluson® P8 / Voluson® P6, Windows detects the device and automatically installs a
driver. During this process, several dialogs may pop up, starting with the "Found New Hardware" dialog.
NOTE: If an external drive was not recognized automatically after connecting it, click RESCAN DRIVE.
The device is then accessible using the drive letter the system assigned to it.
NOTICE
When connecting external USB devices, be sure to execute Safety Directions found in the
Voluson® P8 / Voluson® P6 Basic User Manual.
!! NOTICE:
3-5-9-2

External USB-Devices - Disconnection

Before an external USB-device (e.g., USB-memory stick) can be disconnected, the system has to be
informed about the removal of the device!
Unplugging or ejecting USB devices without first stopping them can often cause the system to
CAUTION
crash and possibly result in loss of valuable data.
!! CAUTION:
By pressing the DRIVES in the Sytem Setup, a dialog window (see:
The "Connect USB and Network Drives" window shows all USB and Network drives connected to the
system. Using this dialog, the USB-devices can be stopped before they are physically disconnected.
6 DRAFT (J
EVISION
Figure 3-11 Connect USB and Network Drives
Chapter 3 - Setup Instructions
17, 2013)
ANUARY
V ® P8 / V
OLUSON OLUSON
P S
ROPRIETARY ERVICE
Figure 3-11 below) is displayed.
® P6
M
ANUAL
3-21