Table of Contents
Advertisement
Query
Returned Format
<value> The cycle-to-cycle jitter time of the waveform.
<result_state> If SENDVALID is ON, the result state is returned with the measurement result.
Example
Measure Commands
CTCJitter
:MEASure:CTCJitter? <source>,<direction>
The :MEASure:CTCJitter? query returns the cycle-to-cycle jitter time
measurement.
[:MEASure:CTCJitter <value>[,<result_state>]<NL>
Refer to the MEASure:RESults command, for a list of the result states.
This example places the cycle-to-cycle jitter of channel 1 in the numeric
variable, Value, then prints the contents of the variable to the computer's
screen.
10 OUTPUT 707;":SYSTEM:HEADER OFF"
20 OUTPUT 707;":MEASURE:CTCJITTER CHANNEL1,RISING"
30 ENTER 707;Value
40 PRINT Value
50 END
23-24
!Response headers off
Advertisement
Table of Contents
