Command
<N> is an integer, 1 - 4.
Example
Query
Returned format
Example
CLOCk
This command is only available when the E2688A High Speed Serial Software.
:MEASure:CLOCk {{ON|1},CHANnel<N> | {OFF|0}}
The :MEASure:CLOCk command turns the recovered clock display on or off and
sets the the clock recovery channel source.
This example turns the recovered clock display on for channel 1.
10 OUTPUT 707;":MEASURE:CLOCK ON,CHANNEL1"
20 END
:MEASure:CLOCk?
The :MEASure :CLOCk? query returns the state of the recovered clock display.
[:MEASure:CLOCk] {1 | 0}<NL>
This example places the current setting of the recovered clock display in the
variable Setting, then prints the contents of the variable to the computer's
screen.
10
OUTPUT 707;"SYSTEM:HEADER OFF"
20
OUTPUT 707;":MEASURE:CLOCK?"
30
ENTER 707;Setting
40
PRINT Setting
50
END
Measure Commands
CLOCk
23-15