Table of Contents
Advertisement
Disk Commands
STORe (Obsolete)
<preamble> {ON | OFF}
<start> An integer value which is the starting point in memory where you want the
STORe command to beginning saving data to a file. The minimum value is 0
and the maximum value depends on the maximum memory depth.
<size> An integer value which is the amount of data in memory that you want to save
to a file. The minimum value is 0 and the maximum value depends on the
maximum memory depth.
Example
This example stores the current oscilloscope setup to FILE1 on the disk.
10 OUTPUT 707;":DISK:STORE SETUP,""FILE1"""
20 END
13-45
Advertisement
Table of Contents
