Agilent Technologies Infiniium 8000A Programmer's Reference Manual page 279

X Units An integer (4 byte signed) which is the number
of X units columns (n) depends on the number
of sources being store. The X units is the unit of
measure for each time value of the acquired
data. X unit definitions are:
0 = Unkown
1 = Volt
2 = Second
3 = Constant
4 = Amp
5 = Decibel
Y Units An integer (4 byte signed) which is the number
of Y units columns (n) depends on the number
of sources being store. The Y units is the unit of
measure of each voltage value of the acquired
waveform. Y units definitions are:
0 = Unkown
1 = Volt
2 = Second
3 = Constant
4 = Amp
5 = Decibel
Date A 16 character array which is the date when the
waveform was acquired. The default value is 27
DEC 1996.
Time A 16 character array which is the time when the
waveform was acquired. The default value is
01:00:00:00.
Frame A 24 character array which is the model number
and serial number of the scope in the format of
MODEL#:SERIAL#.
Waveform Label A 16 character array which is the waveform
label.
Time Tags A double (8 bytes) which is the time tag value of
the segment being saved.
Disk Commands
BIN Header Format
13-25