Table of Contents
Advertisement
Command
<data_source> {CHANnel<N> | FUNCtion<N> | WMEMory<N>}
<N> is an integer, 1 - 4.
Example
Query
Returned Format
<value> Slew rate in volts per second.
Example
SLEWrate
This command is only available when the E2681A Jitter Analysis Software is installed.
:MEASure:SLEWrate [<data_source>]
The :MEASure:SLEWrate command measures the slew rate of the specified data
source.
This example measures the slew rate of channel 1.
10
OUTPUT 707;":MEASURE:SLEWRATE CHAN1"
20
END
:MEASure:SLEWrate? [<data_source>]
The :MEASure:SLEWrate? query returns the measured slew rate for the
specified source.
{:MEASure:SLEWrate] <value><NL>
This example places the channel 1 value of slew rate in the numeric
variable,Time, then prints the contents of the variable to the computer's screen.
10
OUTPUT 707;":SYSTEM:HEADER OFF"!Response headers off
20
OUTPUT 707;":MEASURE:SLEWRATE? CHAN1"
30
ENTER 707;Time
40
PRINT Time
50
END
Measure Commands
SLEWrate
23-109
Advertisement
Table of Contents
