Agilent Technologies Infiniium 8000A Programmer's Reference Manual page 613

Query
Returned format
<value> The clock time interval error value.
<result_state> If SENDvalid is ON, the result state is returned with the measurement result.
Example
:MEASure:TIEClock2? <source>,{SECond |
UNITinterval},<direction>,{AUTO |
CUSTOM,<frequency> |
VARiable,<frequency>,<bandwidth> | CLOCk}
The :MEASure:TIEClock2? query returns the current value of the clock time
interval error.
[:MEASure:TIEClock2] <value>[,<result_state>]<NL>
See the :MEASure:RESults table in this chapter for a list of the result states.
This example places the current value of the clock time interval error in the
variable Value, then prints the contents of the variable to the computer's screen.
10 OUTPUT 707;"SYSTEM:HEADER OFF"
20 OUTPUT 707;":MEASURE:TIECLOCK2?
CHANNEL1,SECOND,FALLING,CUSTOM,2.5E9"
30 ENTER 707;Value$
40 PRINT Value$
50 END
Measure Commands
TIEClock2
23-115