Table of Contents
Advertisement
Query
Returned Format
<value> The ratio (%) of the positive pulse width to the period.
<result_state> If SENDvalid is ON, the result state is returned with the measurement result.
Example
:MEASure:DUTYcycle? [<source>],<direction>
The :MEASure:DUTYcycle? query returns the measured duty cycle (%) of the
specified source.
[:MEASure:DUTYcycle] <value>[,<result_state>]<NL>
See the :MEASure:RESults table in this chapter for a list of the result states.
This example places the current duty cycle of the channel 1 waveform in the
numeric variable, Value, then prints the contents of the variable to the
computer's screen.
10
OUTPUT 707;":SYSTEM:HEADER OFF"!Response headers off
20
OUTPUT 707;":MEASURE:DUTYCYCLE? CHANNEL1"
30
ENTER 707;Value
40
PRINT Value
50
END
Measure Commands
DUTYcycle
23-37
Advertisement
Table of Contents
