Table of Contents
Advertisement
Command
Example
Query
Returned Format
Example
See Also
MEASurement
:LTESt:MEASurement {MEAS1 | MEAS2 | MEAS3 | MEAS4 |
MEAS5}
The :LTESt:MEASurement command selects the current source for Limit Test
for the ULIMit and LLIMit commands. It selects one of the active measurements
as referred to by their position in the measurement window on the bottom of
the screen. Measurements are numbered from left to right.
The following example selects the first measurement as the source for the limit
testing commands.
10
OUTPUT 707;":LTEST:MEASUREMENT MEAS1"
20
END
:LTESt:MEASurement?
The query returns the currently selected measurement source.
[:LTESt:MEASurement]{MEAS1 | MEAS2 | MEAS3 | MEAS4 | MEAS5}
<NL>
The following example returns the currently selected measurement source for
the limit testing commands.
10
DIM SOURCE$[50]
20
OUTPUT 707;":LTEST:MEASUREMENT?"
30
ENTER 707;SOURCE$
40
PRINT SOURCE$
50
END
Measurements are started in the Measurement Subsystem.
Limit Test Commands
MEASurement
20-5
Advertisement
Table of Contents
