Table of Contents
Advertisement
Command
<N> An integer, 1 - 4, representing the selected function.
<operand> {CHANnel<n> | FUNCtion<n> | WMEMory<n> | <float_value>}
Example
MULTiply
:FUNCtion<N>:MULTiply <operand>,<operand>
The :FUNCtion<N>:MULTiply command defines a function that algebraically
multiplies the first operand by the second operand.
CHANnel<n> is:
An integer, 1 - 2, for two channel Infiniium Oscilloscopes.
An integer, 1 - 4, for all other Infiniium Oscilloscope models.
FUNCtion<n> and WMEMory<n> are:
An integer, 1 - 4, representing the selected function or waveform memory.
<float_value> is:
A real number from -1E6 to 1E6.
This example defines a function that multiplies channel 1 by waveform
memory 1.
10
OUTPUT 707;":FUNCTION1:MULTIPLY CHANNEL1,WMEMORY1"
20
END
Functions Used as Operands
A function may be used as a source for another function, subject to the following
constraints:
F4 can have F1, F2, or F3 as a source.
F3 can have F1 or F2 as a source.
F2 can have F1 as a source.
F1 cannot have any other function as a source.
Function Commands
MULTiply
16-29
Advertisement
Table of Contents
