Agilent Technologies Infiniium 8000A Programmer's Reference Manual page 791

Set the Mode Before Executing Commands
Before executing the :TRIGger:ADVanced:VIOLation:SETup
commands, set the mode by entering:
:TRIGger:MODE ADVanced and
:TRIGger:ADVanced:MODE VIOLation and
:TRIGger:ADVanced:VIOLation:MODE SETup and
:TRIGger:ADVanced:VIOLation:SETup:MODE <setup_mode>
Where <setup_mode> includes SETup, HOLD, and SHOLd.
To query the oscilloscope for the advanced trigger violation setup mode,
enter:
:TRIGger:ADVanced:VIOLation:SETup:MODE?
29-83