Use the Width control to define the maximum pulse width that is
Width
considered a glitch. The glitch width range is from 1.5 ns to 10 s.
Available trigger conditioning includes HOLDoff and HYSTeresis (Noise
Reject).
Set the Mode Before Executing Commands
Before you can execute the :TRIGger:GLITch commands, set the mode
by entering:
:TRIGger:MODE GLITch
This command sets the conditions for the glitch polarity, source, and
width trigger commands.
To query the oscilloscope for the trigger mode, enter:
:TRIGger:MODE?
You set up the :TRIGger:GLITch commands with the following
commands and queries:
• POLarity
• SOURce
• WIDTh
29-21