Table of Contents
Advertisement
Query
Returned Format
<value> Hold time in seconds.
Example
See Also
:MEASure:HOLDtime?
[<data_source>,<data_source_dir>,<clock_source>,
<clock_ source_dir>]
The :MEASure:HOLDtime? query returns the measured hold time between the
specified clock and data source.
{:MEASure:SETuptime] <value><NL>
This example places the current value of hold time in the numeric variable,Time,
then prints the contents of the variable to the computer's screen.
10
OUTPUT 707;":SYSTEM:HEADER OFF"!Response headers off
20
OUTPUT 707;":MEASURE:HOLDTIME? CHAN1,RIS,CHAN2,RIS"
30
ENTER 707;Time
40
PRINT Time
50
END
Refer to the :MEASure:RESults? query for information on the results returned
and how they are affected by the SENDvalid command. Refer to the individual
measurements for information on how the result state is returned.
Measure Commands
HOLDtime
23-65
Advertisement
Table of Contents
