Table of Contents
Advertisement
Command
<top_volts>
<base_volts> A real number specifying voltage.
Example
Measure Commands
DEFine
:MEASure:DEFine TOPBase,{{STANdard | HISTONLY |
MINMax | {<top_volts>,<base_volts>}},
{ALL|CHANnel<N>|FUNCtion<N>|WMEMory<N>}
This example sets the parameters for a time measurement from the first positive
edge at the upper threshold level to the second negative edge at the middle
threshold.
10
OUTPUT 707;":MEASURE:DEFINE DELTATIME,RISING,
1,UPPER,FALLING,2,MIDDLE"
20
END
If you specify one source, both parameters apply to that waveform. If you
specify two sources, the measurement is from the first positive edge on source
1 to the second negative edge on source 2.
Specify the source either using :MEASure:SOURce, or using the optional
<source> parameter when the DELTatime measurement is started.
23-32
Advertisement
Table of Contents
