Table of Contents
Advertisement
Query
Returned Format
<value> Delta time from the first specified edge on one source to the next specified edge
<result_state> If SENDvalid is ON, the result state is returned with the measurement result.
Example
Related Commands
:MEASure:DELTatime? [<source>[,<source>]]
The :MEASure:DELTatime? query returns the measured delta time value.
[:MEASure:DELTatime] <value>[,<result_state>]<NL>
on another source.
See the :MEASure:RESults table in this chapter for a list of the result states.
This example places the current value of delta time in the numeric variable,
Value, then prints the contents of the variable to the computer's screen. This
example assumes the source was set using :MEASure:SOURce.
10
OUTPUT 707;":SYSTEM:HEADER OFF"!Response headers off
20
OUTPUT 707;":MEASURE:DELTATIME?"
30
ENTER 707;Value
40
PRINT Value
50
END
Turn Off Headers
When receiving numeric data into numeric variables, turn off the headers.
Otherwise, the headers may cause misinterpretation of returned data.
:MEASure:DEFine DELTatime
Measure Commands
DELTatime
23-35
Advertisement
Table of Contents
