Table of Contents
Advertisement
Command
<N> An integer, 1 - 4, representing the selected function.
<operand> {CHANnel<n> | FUNCtion<n> | WMEMory<n> | <float_value>}
Example
MAXimum
:FUNCtion<N>:MAXimum <operand>
The :FUNCtion<N>:MAXimum command defines a function that computes the
maximum value of the operand waveform in each time bucket.
CHANnel<n> is:
An integer, 1 - 2, for two channel Infiniium Oscilloscopes.
An integer, 1 - 4, for all other Infiniium Oscilloscope models.
FUNCtion<n> and WMEMory<n> are:
An integer, 1 - 4, representing the selected function or waveform memory.
<float_value> is:
A real number from -1E6 to 1E6.
This example sets up function 2 to compute the maximum of each time bucket
for channel 2.
10
OUTPUT 707;":FUNCTION2:MAXIMUM CHANNEL2"
20
END
Functions Used as Operands
A function may be used as a source for another function, subject to the following
constraints:
F4 can have F1, F2, or F3 as a source.
F3 can have F1 or F2 as a source.
F2 can have F1 as a source.
F1 cannot have any other function as a source.
Function Commands
MAXimum
16-27
Advertisement
Table of Contents
