Patient Modes; Figure 4-2. Change Patient Mode Menu - Covidien Nellcor PM10N Service Manual

Modification and Testing

Patient Modes

4.3.3
To verify that patient modes can be selected
Select the Change Patient Mode menu.
1.
A check mark appears next to the selected patient mode.
Press the Down button to highlight each patient mode and press OK to verify that the correct patient
2.
mode icon appears.
Pass codes are required to change to Homecare Mode, Sleep Study Mode, and back to Standard (Adult
or Neonatal) Mode.
Table 4-2 on page 4-5
setting appears in the upper left of the monitoring system's display.

Note:
To change to Homecare Mode or Sleep Study Mode requires a unique pass code for each mode.
Contact Covidien Technical Services for these pass codes.
4-4
Figure 4-2. Change Patient Mode Menu
lists the patient modes and their icons. The icon for the current patient mode
Service Manual