Modification and Testing
1
2
3
4
BPM (PR) Test
With the monitoring system turned off, connect the DEC-4 pulse oximetry cable to the sensor port.
1.
Connect the SRC-MAX tester to the other end of the DEC-4 cable.
2.
Turn on the monitoring system by pressing and holding the Power On/Off button. Wait for the
3.
monitoring system to complete POST.
4-28
Figure 4-27. SRC-MAX Oximetry Tester
DEC-4 cable connector
Infrared LED drive indicator
Pulse rate selection button
Light level selection button
5
%SpO
select button
2
6
% Modulation select button
7
Battery Low indicator
8
Red LED drive indicator
Service Manual