Table 3-1. Monitoring Status Codes - Covidien Nellcor PM10N Service Manual

Data Management
COM Port USB Driver Alternatives
Load the appropriate driver from the product CD into the connected computer.
•
Contact Technical Services or a local Covidien representative.
•
To install a USB driver from the compact disc
Insert the Nellcor™ portable SpO
1.
designated personal computer (PC).
Copy the COVIDIEN USB to UART Bridge Driver zip file to the PC, installing it in the desired
2.
program folder.
Right-click on the zipped folder.
3.
Select Extract All.
4.
Open the extracted folder.
5.
Launch the Driver Installer executable file.
6.

Note:
To change the location of the driver, select the desired mapping by clicking Change Install
Location.
Click Install.
7.
3-6
Table 3-1. Monitoring Status Codes
Status
code
LM Loss of pulse, patient motion
LP Loss of pulse
CB Critically low battery
LB Low battery
SO Sensor off
SD Sensor disconnect
AO Alarm off
AS Alarm silenced
MO Signal interference, patient motion
PS Pulse search
patient monitoring system compact disc (CD) into the
2
Description
Service Manual