Table of Contents
Advertisement
Service Procedures
1.2.3
WARNING:
To avoid possible injury, do not attempt to service the monitoring system if there are any signs of
burning or smoking coming from the monitoring system.
WARNING:
Before attempting to service the monitoring system, disconnect it from the patient to avoid
possible injury to the patient.
WARNING:
Before attempting to disassemble the monitoring system, remove the batteries to prevent
possible injury.
WARNING:
Ensure that conductive portions of the electrodes, leads, and cable do not come into contact with
any other conductive parts.
WARNING:
High voltage is generated by the LCD backlight driver. Exercise caution when operating the
monitoring system with covers open.
WARNING:
Extreme care must be taken in modifying default or other settings to ensure they are appropriate
to the intended use.
WARNING:
Make sure to complete all performance tests in
the monitoring system into operation after repair or maintenance. Failure to perform all tests
could result in erroneous monitoring system readings.
WARNING:
Any connections between this monitoring system and other devices must comply with applicable
medical systems safety standards such as IEC 60601-1. Failure to do so could result in unsafe
leakage current and grounding conditions.
WARNING:
To ensure accurate performance and prevent device failure, do not expose the monitoring system
to extreme moisture, such as direct exposure to rain. Such exposure may cause inaccurate
performance or device failure. Reference the Operator's Manual for fluid ingress specifications.
Service Manual
Chapter 4, Modification and Testing
Safety Information
before placing
1-3
Hide quick links:
Advertisement
Table of Contents
