Maintenance Procedures; Inlet Water Trap Filters And O-Ring Assembly; Figure 2-1. Inlet Water Trap Filter Replacement - Covidien Newport e360 Service Manual

Maintenance Procedures

2.7

WARNING:
Disconnect electrical power, air, and oxygen sources before attempting any disassembly.

Inlet Water Trap Filters and O-Ring Assembly

2.7.1
Oxygen Filter
To replace the oxygen filter, perform the following steps:
Unscrew the collection bowl from the inlet water trap.
1.
Unscrew the filter holder.
2.
Remove and replace the inlet filter and o-ring (JFK100P).
3.
Service Manual
Figure 2-1. Inlet Water Trap Filter Replacement
Maintenance Procedures
2-5