Ansi/Ncsl Z540.3-2006 And Iso/Iec 17025 Verification - Keysight N5227A Service Manual
2-port and 4-port
pna microwave
network analyzer
10 mhz - 67 ghz
Hide thumbs
Also See for N5227A:
- Installation and service manual (72 pages) ,
- Security features and document of volatility (34 pages) ,
- Service manual (370 pages)
Table of Contents
Advertisement
Tests and Adjustments
PNA Series Microwave Network Analyzers
ANSI/NCSL Z540.3–2006 and ISO/IEC 17025 Verification
N5227A
ANSI/NCSL Z540.3–2006 and ISO/IEC 17025 Verification
To meet the criteria for ANSI/NCSL Z540.03-2006 and ISO/IEC 17025 verification, perform the preliminary
1
checks and all performance tests without stopping to repair or adjust
. Refer to
Figure 3-1
for test flow. Print
data at the completion of all the tests, even if you are aware that the analyzer did not pass. If there is a
failure, complete the verification before you troubleshoot, repair, and adjust. After the failure has been
corrected, repeat the entire set of performance tests and generate a new set of data.
Figure 3-1
ANSI/NCSL Z540.3–2006 and ISO/IEC 17025 Verification Flowchart
1. Stop only in case of a catastrophic failure or cable connector damage
3-8
Service Guide N5227-90001
Advertisement
Table of Contents
Troubleshooting
