Siemens SINUMERIK 840Di Function Manual page 815

Example:
Machine data for TRAANG:
; FRAME configurations
$MC_MM_SYSTEM_FRAME_MASK = 'H1'
$MC_CHSFRAME_RESET_MASK = 'H41'
$MC_CHSFRAME_POWERON_MASK = 'H41'
$MN_FRAME_GEOAX_CHANGE_MODE = 1
$MC_RESET_MODE_MASK = 'H4041'
;$MC_RESET_MODE_MASK = 'H41'
;$MC_GCODE_RESET_VALUES[7] = 2
$MC_GCODE_RESET_VALUES[7] = 1
$MN_MM_NUM_GLOBAL_USER_FRAMES = 0
$MN_MM_NUM_GLOBAL_BASE_FRAMES = 3
$MC_MM_NUM_USER_FRAMES = 10
$MC_MM_NUM_BASE_FRAMES = 3
$MN_NCBFRAME_RESET_MASK = 'HFF'
$MC_CHBFRAME_RESET_MASK = 'HFF'
$MN_MIRROR_REF_AX = 0
$MN_MIRROR_TOGGLE = 0
$MN_MM_FRAME_FINE_TRANS = 1
$MC_FRAME_ADD_COMPONENTS = TRUE
; TRAANG is 1st transformer
$MC_TRAFO_TYPE_1 = 1024
$MC_TRAFO_AXES_IN_1[0] = 4
$MC_TRAFO_AXES_IN_1[1] = 3
$MC_TRAFO_AXES_IN_1[2] = 2
$MC_TRAFO_AXES_IN_1[3] = 0
$MC_TRAFO_AXES_IN_1[4] = 0
Axis Types, Coordinate Systems, Frames (K2)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
; SETFRAME
; Frames are active after RESET
; Frames are deleted on POWER ON
; Frames are calculated after switchover of the
geo axis.
; Basic frame is not deselected after RESET
; Basic frame is deselected after RESET
; G54 is the default setting
; G500 is the default setting
; From 5 to 100
; From 0 to 8
; No scaling when mirroring
; Fine offset
; G58, G59 is possible
; Oblique axis
; Axis is parallel to z
Detailed Description
2.4 Frames
2-85