Siemens SINUMERIK 840Di Function Manual page 1011

Code
BHGIn:
BHGOut:
BHGStatRec:
BHGTimeout:
NCCyclTimeout:
NCRunupTimeout:
ListMDecGrp:
NCKomm:
MMCToIF:
HWheelMMC:
MsgUser:
UserIR:
IRAuxfuT:
IRAuxfuH:
IRAuxfuE:
UserVersion:
END_VAR
VAR OUTPUT
MaxBAG:
MaxChan:
MaxAxis:
ActivChan:
ActivAxis:
UDInt : INT ;
UDHex: INT ;
UDReal : INT ;
END_VAR
Description of formal parameters 810D and 840D
The table below lists all formal parameters of the RUN_UP function for the 810D and 840D:
Signal
MCPNum
MCP1In
MCP2In
Power Line Basic PLC Program (P3)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
POINTER;
POINTER;
POINTER;
S5TIME:= S5T#700MS;
S5TIME:= S5T#200MS;
S5TIME:= S5T#50S;
INT:= 0;
BOOL:= FALSE;
BOOL:= TRUE;
BOOL:= TRUE;
INT:= 10;
bool:= FALSE
bool:= FALSE;
bool:= FALSE;
bool:= FALSE;
Pointer;
INT ;
INT ;
INT ;
ARRAY[1..10] OF BOOL;
ARRAY[1.0.31] OF BOOL;
I/O Type
I Int
I Pointer
Comment
//1 - HHU on MPI
//Transmit data of the HHU
//Receive data of the HHU
//Status DW for receiving HHU
//Selection of handwheel using MMC
//Number of user areas in DB 2
//User programs in OB 40,
//Observe local data expansion!
//Evaluate T function in OB 40
//Evaluate H function in OB 40
//Evaluate E function in OB40
//Pointer to string variable indicated
//in version display
Value range Remarks
Up to 2 Number of active MCPs
0: No MCP installed
E0.0 to E120.0 or Start address for
M0.0 to M248.0 or input signals of relevant
DBn.DBX0.0 to machine control panel
DBXm.0
Detailed description
2.12 Block descriptions
1)
2-99