Siemens SINUMERIK 840Di Function Manual page 472

Brief Description
1.2 Overview of auxiliary functions
Remarks
• Identification of tools either by means of tool number or location number.
• When T0 is selected, the current tool is removed from the tool holder but not replaced by
• T-function-specific machine data:
D functions
D (tool offset)
Address extension
Value range
- - - - - -
Remarks:
Deselection of the tool offset with D0; the default is D1
Application
Selection of the tool offset.
Remarks
• Initial setting: D1
• The default tool cutting edge after tool change can be parameterized via:
• Deselection of the tool offset: D0
• D-function-specific machine data:
1-6
References
/FBW/ Tool Management
/FB/ Description of Functions Basic Machine; Tool Compensation (W1)
a new tool (default setting).
– MD22220 $MC_AUXFU_T_SYNC_TYPE
Meaning
MD20270 $MC_CUTTING_EDGE_DEFAULT
– MD22250 $MC_AUXFU_D_SYNC_TYPE
Value
Value range
0 - 9
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Type Meaning
INT Selection of the tool
offset
Auxiliary Function Output to PLC (H2)
Number
8)
1