Siemens SINUMERIK 840Di Function Manual page 989

Block Function
type no.
Maximum configuration (2 channels, 4 spindles, 4 axes, TMCP)
See above Basic program, base
See above Interface DBs
See above MCP
See above Error/status
messages
See above ASUBs
See above Concurrent axis
See above PLC/NC
communication
See above Tool management
See above Compile cycles
2.11 Supplementary conditions and NC VAR selector
2.11
2.11.1 Supplementary conditions
2.11.1.1 Programming and parameterizing tools
Hardware
Programming devices or PCs with the following equipment are required for the PLCs
installed on the 810D and 840D:
Power Line Basic PLC Program (P3)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
2.11 Supplementary conditions and NC VAR selector
Remark
1 ASUB initiation
For 2 turrets
1 x read variable and 1 x
write variable
2 turrets with one
loading point each
Total
Detailed description
Block size (bytes)
Load Working
memory memory
14796 11720
2542 2090
2300 1962
1572 1350
656 538
674 560
8070 6388
3430 2854
472 436
34512 27898
2-77