Siemens SINUMERIK 840Di Function Manual page 1264

Detailed Description
2.11 General conditions and NC-VAR_Selector
Graphic
Mouse
Operating system
The required version of STEP7 can be installed on equipment meeting the above
requirements in cases where the package has not already been supplied with the
programming device.
The following functions are possible with this package:
• Programming
• Parameterization
• Testing and diagnostics (ONLINE)
• Documentation
2-70
– Editors and compilers for STL (complete scope of the language incl. SFB/SFC calls),
LAD, FBD
– Creation and editing of assignment lists (symbol editor)
– Data block editor
– Input and output of blocks ON/OFF line
– Insertion of modifications and additions ON and OFF line
– Transfer of blocks from programming device to the PLC and vice versa
– Parameterizing tool HW Config for CPU and I/O device parameterization
– NetPro parameterizing tool for setting the CPU communication parameters
– Output of system data such as hardware and software version, memory capacity, I/O
expansion/assignment
– Variable status/forcing (I/Os, flags, data block contents, etc.)
– Status of individual blocks
– Display of system states (ISTACK, BSTACK, system status list)
– Display of system messages
– PLC STOP/complete restart/overall reset triggering from the programming device
– Compress PLC
– Printout of individual or all blocks
– Allocation of symbolic names (also for variables in data blocks)
– Input and output of comments within each block
– Printout of test and diagnostics displays
– Hardcopy function
– Cross-reference list
– Program overview
– Assignment plan I/O/M/T/Z/D
Minimum
SVGA (1024*768)
Yes
Windows 2000 /XP Professional, STEP7 version 5.3 SP2 or
higher
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Recommendation
PLC Basic Program Solution Line (P3 sl)