Siemens SINUMERIK 840Di Function Manual page 1133

Operating modes and machine functions
Source:
MCP button
AUTOMATIC
MDA
JOG
REPOS
REF
TEACH IN
INC 1 ... 10 000, INC Var. (SW 5 and higher)
SW 4 and lower
Source:
MCP button
INC 1 ... 10 000, INC Var.
INC 1 ... 10 000, INC Var.
INC 1 ... 10 000, INC Var.
Source:
MCP button
INC 1 ... 10 000, INC Var.
(up to SW 4)
Direction keys rapid traverse override
The transfer is dependent upon the selected axis. The associated interface bits are deleted
for axes, which are not selected.
Source:
MCP button
Direction key +
Direction key -
Rapid traverse override
Direction key +
Direction key -
Rapid traverse override
Direction key +
Direction key -
Rapid traverse override
Power Line Basic PLC Program (P3)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Destination:
Interface DB (Parameter ChanNo)
DB11, ... DBX0.0
DB11, ... DBX0.1
DB11, ... DBX0.2
DB11, ... DBX1.1
DB11, ... DBX1.2
DB11, ... DBX1.0
DB11.DBB2, Bits 0 to 5
Destination:
Interface DB (Parameter ChanNo)
DB21, ... DBB13, Bit 0 to 5
DB21, ... DBB17, Bit 0 to 5
DB21, ... DBB21, Bit 0 to 5
Destination:
Interface DB (all axis DBs)
DB31, ... DBB5, Bit 0 to 5
Destination:
Interface DB (Parameter ChanNo)
DB21, ... DBX12.7
DB21, ... DBX12.6
DB21, ... DBX12.5
DB21, ... DBX16.7
DB21, ... DBX16.6
DB21, ... DBX16.5
DB21, ... DBX20.7
DB21, ... DBX20.6
DB21, ... DBX20.5
Detailed description
2.12 Block descriptions
2-221