Detailed description
2.12 Block descriptions
Timing diagram
(1)
(2)
(3)
(4)
(5)
(6)
Call example
CALL FC 7 (
Start :=
ChgdRevNo :=
Ready :=
Error :=
u m 20.6;
r m 20.5;
spb m001;
l db61.dbw 12;
ow w#16#0;
JC error;
m001:
error:
r m 20.5;
2-178
Activation of function
Positive acknowledgment: Tool management has been transferred
Reset function activation after receipt of acknowledgment
Signal change by means of FB
This signal chart is not permissible. The job must generally be terminated since the new tool
positions must be forwarded to the tool management in the NCK.
Negative acknowledgment: Error has occurred, error code in the output parameter "Error".
//Tool management transfer of block for revolver
m 20.5,
//Start := "1 " => transfer trigger
DB61.DBB 1,
m 20.6,
DB61.DBW 12);
//Poll ready
//Reset start
//Jumps, if everything OK
//Error information
//Evaluate error
//Jumps to troubleshooting, if <> 0
//Start of another program
//Reset start, if an error has occurred
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Power Line Basic PLC Program (P3)