Siemens SINUMERIK 840Di Function Manual page 629

Sequence Command
4 /_N_CMA_DIR/_N_PROG_
EVENT_SPF or name from
5
RESET_MODE_MASK,
GCODE_RESET_VALUES,
GCODE_RESET_MODE
Event
Operator panel reset
Table 2-7 Sequence with operator panel reset
Sequence Command
1 Select channel and mode:
2
3
RESET_MODE_MASK,
GCODE_RESET_VALUES,
GCODE_RESET_MODE
4 /_N_CMA_DIR/_N_PROG_
EVENT_SPF or name from
5
RESET_MODE_MASK,
GCODE_RESET_VALUES,
GCODE_RESET_MODE
Mode Group, Channel, Program Operation, Reset Response (K1)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
MD11620
MD20110 $MC_
MD20150 $MC_
MD20152 $MC_
Any
Reset
MD20110 $MC_
MD20150 $MC_
MD20152 $MC_
MD11620
MD20110 $MC_
MD20150 $MC_
MD20152$MC_
Boundary conditions
(must be satisfied before the
command)
As an ASUB
Control activated:
Reset sequence with evaluation
Boundary conditions
(must be satisfied before the
command)
Initial state: Any mode, any
channel status
Control activated:
Reset sequence with evaluation
As an ASUB
Control activated:
Reset sequence with evaluation
Detailed Description
2.7 Program operation mode
Comments
Implied call of the path name as
an ASUB
Control activated
Reset sequence with evaluation
of MD20110 and MD20150 and
MD20152. Meaning:
The G-code indexed position
continues to be specified with
machine data
Comments
Select mode/channel status from
any state
Control activated
Reset sequence with evaluation
of MD20110 and MD20150 and
MD20152
Implied call of the path name as
an ASUB
Control activated
Reset sequence with evaluation
of MD20110 and MD20150 and
MD20152. Meaning:
The G-code indexed position
continues to be specified with
machine data
2-93