Leds; Leds For The Twisted Pair Ports; Leds For The Sfp/Sfp+ Ports; Figure 5: Link/Activity Leds For The Twisted Pair Ports - Allied Telesis XS900MX Series Installation Manual

Chapter 1: Overview

LEDs

LEDs for the
Twisted Pair
Ports
LEDs for the
SFP/SFP+ Ports
26
This section describes the functions of the LEDs.
Each twisted pair port has one status LED that displays link and activity
information. Refer to Figure 5.
Link/activity LED for the
Top Port
Figure 5. Link/activity LEDs for the Twisted Pair Ports
The Port LEDs are described in Table 1.
Table 1. Link/activity LEDs for the Twisted Pair Ports
LED State
Solid Green
Flashing
Green
Solid Amber
L/A LED
Flashing
Amber
Off
The LEDs for the SFP/SFP+ ports are located between the ports, as
shown in Figure 6 on page 27. Each port has one LED. The left LED is for
the top port and the right LED is for the bottom port.
Link/activity LED for the
Bottom Port
Description
A port has established a 10Gbps link to a
network device.
A port is transmitting or receiving data at
10Gbps.
A port has established a 100Mbps or 1Gbps
link to a network device.
A port is transmitting or receiving data at
100Mbps or 1Gbps.
A port has not established a link with
another network device or the LEDs are
turned off. To turn on the LEDs, use the
eco-friendly button.