Figure 37: Sliding In The Bracket Tray; Figure 38: Tightening The Two Thumbscrews On The At-Rkmt-J15 Bracket - Allied Telesis XS900MX Series Installation Manual

Chapter 4: Installing the Switch on a Table or in an Equipment Rack
10. Slide in the bracket tray. Refer to Figure 37.
Figure 37. Sliding in the Bracket Tray
11. Tighten the two thumbscrews to secure the tray to the bracket. Refer
to Figure 38.
Figure 38. Tightening the Two Thumbscrews on the AT-RKMT-J15
Bracket
12. Go to Chapter 6, "What to Do First" on page 81.
68