Cabling The Default 15/S1 And 16/S2 Trunk Ports - Allied Telesis XS900MX Series Installation Manual

Cabling the Default 15/S1 and 16/S2 Trunk Ports

Before powering on the stack, you need to cable the default 15/S1 and 16/
S2 trunk ports. The ports support the following cables as trunk cables:
 AT-StackXS/1.0 (1 meter) stacking transceiver and cable
 AT-SP10TW1 (1 meter) Direct Attach Cable

AT-SP10TW3 (3 meter) Direct Attach Cable
Note
The XS900MX Switches do not support the AT-SP10TW7 Direct
Attach Cable.
Instructions for installing the cables are found in "Installing AT-StackXS/
1.0, AT-SP10TW1, or AT-SP10TW3 Cables" on page 136.
When cabling the ports, be sure that the ports crossover. Port 15/S1 on
one switch has to connect to port 16/S2 on the second switch, and port 16/
S2 has to connect to port 15/S1.
After cabling the trunk ports, go to "Powering On the Switches Individually"
on page 94 to assign the switch ID numbers yourself or "Powering On the
Switches Simultaneously" on page 96 to let the switches assign the
numbers.
XS900MX Series Installation Guide for VCStack
93