Section Four
Register Bit Descriptions
This section presents detailed information on the use of the GPIB-1014P Talker/Listener/Controller
registers.
Register Map
The register map for the GPIB-1014P is shown in Table 4-1. This table gives the register name, the
register address, the type of the register, and the size of the register in bits.
Register Name
GPIB Interface Register Group:
Data In Register
Command/Data Out Register
Interrupt Status Register 1
Interrupt Mask Register 1
Interrupt Status Register 2
Interrupt Mask Register 2
Serial Poll Status Register
Serial Poll Mode Register
Address Status Register
Address Mode Register
Command Pass Through Register
Auxiliary Mode Register
Hidden Registers
Internal Counter Register
Parallel Poll Register
Auxiliary Register A
© National Instruments Corporation
Table 4-1. GPIB-1014P Register Map
Address (Hex)
Base address + 1
Base address + 1
Base address + 3
Base address + 3
Base address + 5
Base address + 5
Base address + 7
Base address + 7
Base address + 9
Base address + 9
Base address + B
Base address + B
Base address + B
Base address + B
Base address + B
4-1
Type
Size
Read only
8-bit
Write only
8-bit
Read only
8-bit
Write only
8-bit
Read only
8-bit
Write only
8-bit
Read only
8-bit
Write only
8-bit
Read only
8-bit
Write only
8-bit
Read only
8-bit
Write only
8-bit
Write only
8-bit
Write only
8-bit
Write only
8-bit
(continues)
GPIB-1014P User Manual