National Instruments Corporation GPIB-1014P User Manual page 164

Index
Auxiliary Register A (AUXRA), 4-38 to 4-39
Auxiliary Register B (AUXRB), 4-40 to 4-41
Auxiliary Register E (AUXRE), 4-42
End of String Register (EOSR), 4-46
Internal Counter Register (ICR), 4-35
overview, 4-34
Parallel Poll Register (PPR), 4-36 to 4-37
Interrupt Mask Register 1 (IMR1), 4-8 to 4-13
Interrupt Status Register 1 (ISR1), 4-8 to 4-13
Interrupt Status Register 2 (ISR2), 4-14 to 4-18
µPD7210 interface registers (chart), 4-4
overview, 4-3 to 4-4
Serial Poll Mode Register (SPMR), 4-19
Serial Poll Status Register (SPSR), 4-19
writing to hidden registers, 4-5
Internal Counter Register (ICR), 4-35
interrupt configuration, VMEbus
interrupt priority code, 3-5 to 3-6
interrupt request line selection, 3-5
overview, 3-5
Interrupt Mask Register 1 (IMR1), 4-8 to 4-13
interrupt status/ID vector selection, configuring, 3-7
Interrupt Status Register 1 (ISR1), 4-8 to 4-13
Interrupt Status Register 2 (ISR2), 4-14 to 4-18
interrupter
definition, 2-9
description of, 2-4
interrupter logic, 6-3 to 6-4
programming considerations, 5-7 to 5-8
INV (Invert Bit), 4-40
ISR1. See Interrupt Status Register 1 (ISR1).
ISR2. See Interrupt Status Register 2 (ISR2).
ISS (Individual Status Select Bit), 4-40
J
jumpers and switches
GPIB cable shield grounding, 3-8
interrupt status/ID vector selection, 3-7
parts locator diagram, 3-2
for Supervisor or Non-privileged access, 3-3
VMEbus base address, 3-4
VMEbus interrupt configuration, 3-5 to 3-6
VMEbus interrupt line selection, 3-5
VMEbus interrupt priority code selection, 3-6
GPIB-1014P User Manual Index-6 © National Instruments Corporation