National Instruments Corporation GPIB-1014P User Manual page 120

Sample Programs
.even
cmdbuf: .= .+100
cmdct: .word 0
datbuf: . = .+100
count: .word 0
datct: .word 0
cic: .byte 0 | Controller-In-Charge flag (non-zero if CIC)
ola: .byte 0
sre: .byte 0
tctadr: .byte 0
vseoi: .byte 0
GPIB-1014P User Manual
| Program Variables/Buffers
| Command buffer for interface messages
| Number of commands to be sent
| Data buffer for device-dependent messages
| Current number of commands transferred
| Number of data bytes to be sent
| Listen address passed to WRITE
| REN flag (zero to not set REN, non-zero to set REN)
| TCT address of new Active Controller
| SEOI flag (zero to not send, non-zero to send
| END message with last DSEND byte)
C-4
Appendix C
© National Instruments Corporation