National Instruments Corporation GPIB-1014P User Manual page 162

Index
E
electrical characteristics. See physical and electrical characteristics.
END IE (End Received Interrupt Enable Bit), 4-10 to 4-11
End of String Register (EOSR), 4-46
END or EOS, sending/receiving, 5-7
END RX (End Received Bit), 4-10 to 4-11
EOI (End or Identify Bit), 4-45
EOI (end or identify) line, E-3
EOS7-EOS0 (End of String Bits 7 through 0), 4-46
EOSR. See End of String Register (EOSR).
ERR (Error Bit), 4-11 to 4-12
ERR IE (Error Interrupt Enable Bit), 4-11 to 4-12
Execute Parallel Poll command
codes for, 4-29
description, 4-34
F
features of GPIB-1014P, 1-1
Finish Handshake (FH) command
codes for, 4-28
description, 4-31
G
GET (Group Execute Trigger) command, 4-25
Go To Standby command
codes for, 4-29
description, 4-32
GPIB cable shield grounding, 3-8
GPIB Controller. See Controller function.
GPIB-1014P
block diagram, 2-8
capabilities, 2-10 to 2-12
contents of kit, 1-3
definition, v, 1-1
features of, 1-1
functional description, 2-5 to 2-12
IEEE-1014 compliance levels, 2-12
illustration, 1-2
major components of, 2-9
optional equipment, 1-3
parts list and schematic diagrams, B-1 to B-8
theory of operation, 6-1 to 6-5
versions of, 1-2
GPIB TLC. See Talker/Listener/Controller (TLC).
GTL (Go To Local) command, 4-25
GPIB-1014P User Manual Index-4 © National Instruments Corporation