Bios Utility Issues; Creating An Array With The Bios Utility Changes The Bios Boot Order; Hot-Plug Functionality Does Not Work In The Bios Utility; Performance Issues - Oracle SG-XPCIESAS-R-INT-Z Installation Manual

BIOS Utility Issues

This section contains the known issues related to the BIOS RAID Configuration
Utility:
"Creating an Array With the BIOS Utility Changes the BIOS Boot Order" on
■
page 54
"Hot-Plug Functionality Does Not Work in the BIOS Utility" on page 54
■
"Performance Issues" on page 54
■
Creating an Array With the BIOS Utility Changes
the BIOS Boot Order
Workaround: After creating the array, check the BIOS settings to verify the correct
boot order and make changes as necessary. For more information, see
For Controlling the Boot Order of Logical Drives" on page
Hot-Plug Functionality Does Not Work in the
BIOS Utility
Workaround: Hot-plugging of enclosures is not supported in the BIOS RAID
Configuration utility. Hot-plugging of SAS/SATA hard disk drives (HDDs) is
supported only within hard disk enclosures and only under the conditions specified
in "Understanding Hot-Plug Limitations and Conditions Within the BIOS RAID
Configuration Utility" on page

Performance Issues

This section contains the known performance issues:
"The System Freezes When a Sun Storage 32GB SLC SATA Solid State Drive (SSD)
■
is Configured In the HBA" on page 55
"Cannot Access the HBA From the GUI Nor Access a LUN From the Host" on
■
page 55
"Data Miscompare With 3.5" SAS Disks" on page 55
■
54 Sun StorageTek SAS RAID HBA Installation Guide • March 2010
66.
"Best Practices
87.