Qos - Set Algo-Type Taildrop Queue-Drop-Algo Does Not Work (6991230); Packets Might Be Dropped When Using Q-In-Q Interop In Certain Configurations (6989048); The No Default-Metric [,Short(1-16)>] Command Does Not Work As Documented (6987482); Cmm Reports Sas2 On The Nem As Faulty If Sas2 Is Not Enabled (6977266) - Oracle Sun Blade 6000 Product Notes

Known Issues
QoS - set algo-type tailDrop queue-drop-algo Does
Not Work (6991230)
The tailDrop keyword is not supported for use with this product.
Packets Might Be Dropped When Using Q-in-Q
Interop in Certain Configurations (6989048)
Workaround: If you use Q-in-Q interop between the NEM and a third-party switch, manually
turn on the Jumbo Frame feature on the third-party switch.
The no default-metric [,short(1-16)>] Command
Does Not Work as Documented (6987482)
Workaround: Ignore the keyword short when it appears in the syntax of any command and
execute the command without it. Using this CR's synopsis as an example, the command is
issued as no default-metric 1.
CMM Reports SAS2 on the NEM as Faulty if SAS2
Is Not Enabled (6977266)
If you choose to upgrade to the NEM 1.2 firmware, but keep the SAS2 feature disabled, the
CMM reports a fault when you run the show faulty command. Upgrade the CMM firmware to
version 3.0.12.11.b or higher to fix this issue, or use the following.
Target
-------------------+-------------+-------------------------------
/CMM/faultmgmt/1
/CMM/faultmgmt/1/ | class
Workaround: Clear the fault each time the NEM or the CMM is rebooted.
-> set /CH/NEM0/ clear_fault_action=true
Are you sure you want to clear /CH/NEM0 (y/n)? y
Set 'clear_fault_action' to 'true'
38 Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes • March 2016
| Property | Value
| fru | /CH/NEM0
| fault.chassis.sas.comm.fail