Table of Contents
Advertisement
Dakota Ultrasonics
9.4 Automatic Mode
The automatic mode constantly monitors and compensates for temperature when the
accessory temperature sensor is attached to the MiniMax and placed on the joint or
fastener being measured. While this mode eliminates the need to manually insert or
initiate a temperature measurement, it also requires that the user be very cautious
that the sensor is properly attached to the joint or fastener, and not accidentally
removed or misplaced during the measurement process.
Selecting Automatic Temperature Mode
1) Press the
multiple times to tab right, and the
UTIL menu is highlighted and displaying the submenu items.
2) Press the
menu items until TEMP MODE is highlighted.
3) Press the
mode options. Once the AUTO temperature mode is displayed.
4) Press the
key once to activate the menu items tab. Press the
and
arrow keys multiple times to scroll through the sub
and
arrow keys multiple times to scroll the temperature
key once to return to the measurement screen.
key multiple times to tab left, until the
94
key
Advertisement
Table of Contents
