Table of Contents
Advertisement
22) Repeat steps 20 & 21 until the TEMP COEF value is correctly displayed.
23) Press the
entering the TEMP COEF value.
24) Press the
Point Zero List Items until ULTRASONIC 1 is highlighted.
25) Press the
26) Press the
calibration standard.
27) Press the
items until ACCEPT CAL is highlighted.
28) Press the
Zero list, or
29) Press the
Point Zero list until CALC ZERO is highlighted.
key to return to the One Point Zero List, or
and
arrow keys multiple times to scroll through the One
key to display the measurement screen.
key to automatically adjust the settings and measure the
and
arrow keys multiple times to scroll the hot menu
key to accept the calibration and return to the One Point
to cancel the calibration.
and
arrow keys multiple times to scroll through the One
MiniMax Bolt Tension Monitor
71
to cancel
Advertisement
Table of Contents
