Table of Contents
Advertisement
Dakota Ultrasonics
1) Press the
desired storage location.
Note: Elongation values must be stored in column B - ZZ.
Note: Do not press the
activates a high speed mode used specifically with our shut-off box. The
feature is only used when measuring reference lengths. If the
accidentally pressed, press it again to turn the high speed mode off.
2) Press the
location.
Note: If the measurement was saved in error, press the
clear the stored reading and re-measure using steps 1 & 2 above.
3) Continue to repeat this process until all the elongation measurements have
been completed.
Note: The Group View Box can be aborted at any time by pressing the
key.
arrow keys to scroll the target cell cursor to the
key, while measuring elongation's, as this
key to save the current elongation in the highlighted cell
24
key is
key at anytime to
Advertisement
Table of Contents
