1) Assuming the ALARM is ON, press the
times to scroll through the sub menu items until ALARM LOW is highlighted.
2) Press the
key to display the Digits Edit Box.
3) Press the
and
value.
4) Press the
and
locations.
5) Repeat steps 3 & 4 until the ALARM LOW value is correctly displayed.
6) If only one limit will be used, press the
measurement screen and begin taking readings. Otherwise, repeat the
steps outlined above to set the ALARM HIGH limit.
arrow keys multiple times to scroll the highlighted
arrow keys multiple times to scroll the digit
key to return to the
159
MiniMax Bolt Tension Monitor
and
arrow keys multiple