5) Repeat steps 3 & 4 until the NUM BOLTS value is correctly displayed.
6) Press the
key to save the NUM BOLTS and return to the Group List
Items menu, or
Note: If a number greater than 250 is entered, an error message box "VALUE
IS OUT OF RANGE" will be displayed.
7) Press the
key to display the Digits Edit Box and re-enter the NUM
BOLTS.
8) Press the
key to save the NUM BOLTS and return to the Group List
Items menu, or
Selecting the Number of Readings Per Bolt
Note: A bolt can have up to 51 possible measurements and 1 initial length (L-
REF). There must be at least one reading per bolt.
1) Press the
and
Group List Items until NUM READS is highlighted.
2) Press the
key to display the Digits Edit Box.
to cancel entering the NUM BOLTS.
to cancel entering the NUM BOLTS.
arrow keys multiple times to scroll through the new
15
MiniMax Bolt Tension Monitor