Table of Contents
Advertisement
4) Press the
and
locations.
5) Repeat steps 3 & 4 until the NUM READS value is correctly displayed.
6) Press the
key to save the NUM READS and return to the Group List
Items menu, or
Note: If a number less than 1 or greater than 51 is entered, an error message
box "VALUE IS OUT OF RANGE" will be displayed.
7) Press the
key to display the Digits Edit Box and re-enter the NUM
READS.
8) Press the
key to save the NUM READS and return to the Group List
Items menu, or
If there's not enough memory available to create the group, an error message
box "NOT ENOUGH MEMORY" will be displayed. Press the
to return to the Group List Items menu. It may be necessary to free some
memory in the MiniMax at this time.
Selecting the Starting Bolt Number
Note: Depending on the application and layout of the project, the user won't
always want the starting bolt to be 1. This feature allows the user to define
what the starting number will be.
arrow keys multiple times to scroll the digit
to cancel entering the NUM READS.
to cancel entering the NUM READS.
51
MiniMax Bolt Tension Monitor
or
key
Advertisement
Table of Contents
